insulating resistance造句

• 2 . minimum insulated resistance core - core shield 5000m . km 3
  最小绝缘电阻：芯一芯屏蔽5000m . km
• Measure of insulated resistance , absorptance test
  吸收比试验
• Insulated resistance of main wire core
  不大于主线芯绝缘电阻
• Electronic insulating resistance meters
  电子式绝缘电阻表
• Normal temperature insulating resistance
  常温态绝缘强度
• Measuring of insulating resistance
  绝缘电阻测定
• Insulated resistance at
  20时绝缘电阻
• Insulated resistance between shield not less than 1mkm can not strike out for 5min in test
  线组的屏蔽与屏蔽之间的绝缘电阻不小于1m ， km
• Test method for ceramic insulators of spark plug . test method for heat insulating resistance
  火花塞瓷绝缘体试验方法.高温绝缘电阻试验方法
• Insulated resistance that owning splashproof junction box not smaller than 2 megohm 100v
  具有防溅式接线盒的绝缘电阻应不小于2兆欧100伏。
• Insulated resistance between main wire or main wire core and grounding wire not lower than 100m . km at 20
  电缆绝缘主线之间及主线芯与地线之间的绝缘电阻，换算到
• When cable used circumstance can prevent thermoplastic flow and admit reduce insulated resistance , if shorten working hours , pvc insulated and nylon jacketed wires and cables ' operating temperature can increase to 105 s which can continuous operating temperature 90
  当电缆使用环境可防止热塑流动和容许减小绝缘电阻的情况下，能连续90使用的pvc绝缘尼龙护套线，在缩短总工作时间的前提下，其工作温度可提高至105 。
• In order to improve the circuit ' s input impedance , which is affected by insulating resistance of electrode leading wire , terminals and printed circuit board , electrode is connected to the meter through insulating wire of high impedance which is directly welded in the printed circuit board with insulating ring . the deviation of electrode is corrected by software and the algorithm is given
  使用高阻绝缘线连接电极，并将高阻绝缘线直接焊在加有绝缘环的印刷线路板上，从而消除电极引线、接线端子和印刷线路板漏电对放大电路输入阻抗的影响；软件校正电极偏差，并给出校准算法。